Hangzhou Datasports Equipment Co.,Ltd(Oembicycle) , https://www.oembicycle.com
11.3LPM/3.0GPM 55PSI
Description
Run dry without damage (Run Dry Capability)
Quick-connect plug-in ports for easy installation (Hose Kit Included)
Self-priming
Ignition & Thermally Protected
Specifications
How a Diaphragm Pump Works:
1. The pump is driven by an AC or DC motor
2. In front of the motor is a valve assembly containing two to five valve pump chambers. Each valve chamber has a diaphragm behind it in the lower pump housing. As the motor shaft turns, an internal cam positioned behind the diaphragms causes the diaphragms to be pushed forward, then back in a continuous sequence creating a suction. As this suction builds, fluid is pulled through the inlet, through the various valve chamber check valves to the outlet
3. The volume of flow is determined by several factors including: The number and size of the pump chambers, cam offset, operating pressure, fluid viscosity
Application
1. Yacht / RV/Caravan pressurized water system
2. Sprayer fixtures (Vehicle-mounted sprayers, electric sprayer)
3. Clean machine, Humidifier, Water purification, Medical apparatus
4. Food beverage filling & liquid transfer
5. Any other pressurization system
Motor Voltage
12/24V DC
Type
4 chamber diaphragm pump, self priming, capable of being run dry
Mode
Demand or bypass
Certifications Option
CE Approval
Liquid Temperature
140°F (60°C) Max.
Priming Capabilities
6 feet (1.8 m)
Max Pressure
55psi (3.8bar)
Max Flow rate
11.3lpm (3.0gpm)
Thermal Overload Protected
Start working when temperature reach 90°C(+-10%)
Inlet/Outlet Ports
10/13mm pyramid hose barb, 13mm angle hose barb, 1/2 FNPT thread filter for your choice.
Duty Cycle
Intermittent (under different pressure the continuous working time will also be different)
Motor options
2 pin connector
On/off switch
Model
Switch
GPM/LPM
PSI/BAR
Max Draw
(A)Valves
Diaphragm
Ports
Voltage
Wire
Connections
SFDP1-030-055-42
Demand
3.0/11.3
55/3.8
7.5
EPDM
Santoprene
1/2"-14 MNPT
12V
2-Pin/Leads
SFDP2-030-055-42
Demand
3.0/11.3
55/3.8
4.0
EPDM
Santoprene
1/2"-14 MNPT
24V
2-Pin/Leads
Seaflo 12V 24V Mini Electric Pump
11.3LPM/3.0GPM 55PSI
Description
Run dry without damage (Run Dry Capability)
Quick-connect plug-in ports for easy installation (Hose Kit Included)
Self-priming
Ignition & Thermally Protected
Specifications
How a Diaphragm Pump Works:
1. The pump is driven by an AC or DC motor
2. In front of the motor is a valve assembly containing two to five valve pump chambers. Each valve chamber has a diaphragm behind it in the lower pump housing. As the motor shaft turns, an internal cam positioned behind the diaphragms causes the diaphragms to be pushed forward, then back in a continuous sequence creating a suction. As this suction builds, fluid is pulled through the inlet, through the various valve chamber check valves to the outlet
3. The volume of flow is determined by several factors including: The number and size of the pump chambers, cam offset, operating pressure, fluid viscosity
Application
1. Yacht / RV/Caravan pressurized water system
2. Sprayer fixtures (Vehicle-mounted sprayers, electric sprayer)
3. Clean machine, Humidifier, Water purification, Medical apparatus
4. Food beverage filling & liquid transfer
5. Any other pressurization system
Motor Voltage
12/24V DC
Type
4 chamber diaphragm pump, self priming, capable of being run dry
Mode
Demand or bypass
Certifications Option
CE Approval
Liquid Temperature
140°F (60°C) Max.
Priming Capabilities
6 feet (1.8 m)
Max Pressure
55psi (3.8bar)
Max Flow rate
11.3lpm (3.0gpm)
Thermal Overload Protected
Start working when temperature reach 90°C(+-10%)
Inlet/Outlet Ports
10/13mm pyramid hose barb, 13mm angle hose barb, 1/2 FNPT thread filter for your choice.
Duty Cycle
Intermittent (under different pressure the continuous working time will also be different)
Motor options
2 pin connector
On/off switch
Model
Switch
GPM/LPM
PSI/BAR
Max Draw
(A)Valves
Diaphragm
Ports
Voltage
Wire
Connections
SFDP1-030-055-42
Demand
3.0/11.3
55/3.8
7.5
EPDM
Santoprene
1/2"-14 MNPT
12V
2-Pin/Leads
SFDP2-030-055-42
Demand
3.0/11.3
55/3.8
4.0
EPDM
Santoprene
1/2"-14 MNPT
24V
2-Pin/Leads
Model NO.: SFDP1-030-055-42
Condition: New
Application Field: Agriculture
Product: Mini Electric Vacuum Pump
AMPS: 7.5A Max
Flow Rate: 11.3lpm/3.0gpm
Pressure: 45psi/3.8bar
Protection: Thermal/Ignition Protection
Diaphragm: Santoprene
Application: RV/Marine/Yachts/Boat/Caravan/Water System,Ect
Port Dimension: 0.82"(20.95mm)
Valve: EPDM/Viton
Trademark: SEAFLO
Specification: CE
Origin: Fujian, China
HS Code: 8413509090
Model NO.: SFDP1-030-055-42
Condition: New
Application Field: Agriculture
Product: Mini Electric Vacuum Pump
AMPS: 7.5A Max
Flow Rate: 11.3lpm/3.0gpm
Pressure: 45psi/3.8bar
Protection: Thermal/Ignition Protection
Diaphragm: Santoprene
Application: RV/Marine/Yachts/Boat/Caravan/Water System,Ect
Port Dimension: 0.82"(20.95mm)
Valve: EPDM/Viton
Trademark: SEAFLO
Specification: CE
Origin: Fujian, China
HS Code: 8413509090
Seaflo 12V 24V Mini Electric Pump