Socket welding flange refers to the flange welded at the pipe end and outside when the pipe end is inserted into the flange ring ladder. There are two kinds with and without neck. The flange with neck has good rigidity, small welding deformation and good sealing performance. It can be used in the situation with pressure of 1.0 ~ 10.0MPa. B flange for vessel is also socket welding flange, which is used in the occasion with high sealing requirements. During design, socket welding flange can be checked as integral flange. The application scope of Socket Flange is boiler pressure vessel, petroleum, chemical industry, shipbuilding, pharmacy, metallurgy, machinery, stamping elbow food and other industries Socket Welding Carbon Steel Flange Socket Flange,Socket Carbon Steel Flange,Carbon Steel Flanged Fittings,Socket Welding Carbon Steel Flange ShanXi GuanLi Flange Co.Ltd , https://www.sxglflange.com
EcoPura Engage in Blow Molding Machine, Stretch Blow Molding Machine, Bottle Blow Molding Machine, Blow Moulding Machine, Bottles Blowing Machine, Blow Molding Machinery, Bottle Making Machine, Blow Moulding Machinery, Blowing Machine, Moulding Machine, Molding Machine, Blow Bottle Machine, plastic machine, blow machine
EPC-1600 semiautomatic bottle blow molding machine is suitable for producing PET plastic containers and bottles from 10-2000ml. It is widely used to produce the,carbonated drink bottle, pesticide oil bottle cosmetics,wide-mouth bottle etc.
1) Adopting double crank to adjust mould ,heavy locking mould, stable and fast ,Adopt infrared oven to heat the perform ,the perform rotated and heated equally.
2) The air system has been divided into two parts: pneumatic action part and bottle blow part to meet the different requirements for the action and blow .It can provide sufficient and steady high pressure for blowing large irregular shaped bottles.
3)The machine is also equipped with muffler and oiling system to lubricate the mechanical part of the machine.
4) The machine can be operated in the step-by-step mode and the semi-auto mode.
5) The machine is small with low investment, easy and safe to operate
TYPE
ITEM
MEASUREMENT
EPC-1600
END PRODUCT
 Material
Â
PET/PP/PE
Volume
L
0.1-2LÂ
Theoretical output
pcs/h
1200-1600pcs/h
Neck Diameter
mm
15-38
Body Diameter
mm
20-100
MOULD PLATE
Max.mould thickness
mm
180mm
Max.Valid area
mm
350*380
Cavity
Â
2
AUXILIARY
HP Air compressor
M3/Mpa KW
0.7m3/min 3.0Mpa 2sets
Air cooling dryer
M3/Mpa
1.0m3/min 3.0Mpa 1set
Precision Air filters
Â
2 pcs
MAIN MACHINE ELECTRICITY
Total Power
KW
17.50
Voltage/Frequency
V/HZ
220-380/50-60
MACHINE SIZE AND WEIGHT
Main Machine dimension
L*W*H
1.60*0.60*1.61m
Infrared Heater
L*W*H
1.87*0.63*1.45m
Main machine weight
T
0.5
Preform Unscrambler weight
T
0.25