When it comes to controlling the amount of water on the sprinkler, this may be a concern for many drivers, because if it is to ensure that the sprinkler has a good state of operation, it will be able to implement greening and environmental protection. In the program, for a long period of time, the vehicle needs a lot of water, so how should the sprinkler control the water? Some people who buy a sprinkler for the first time will always have an idea that they will think that the greater the number of sprinklers on the sprinkler is, the better. If the sprinkler is sprinkling water, the distance from the sprinkled water to the road surface will be shorter and shorter. In this case, the tanker of the sprinkler vehicle will be filled with water numerous times, increasing the number of times the water is added. However, the sprinkler is This process of going back and forth will also increase fuel consumption, making it impossible to achieve good economic results. However, the number of sprinklers sprinkled water is not a specified parameter, and the actual situation is based on the conditions of the sprinkled ground has been determined by the weather at that time. If the road surface is relatively dry at that time, then the amount of watering should be increased for a long time. If the road is in a relatively humid environment when the weather is fine, the driver should reduce the amount of water sprayed. If there are some gravel and dirt roads, it is necessary to wait for the sanitation workers to clean the road before spraying. However sprinkler watering amount can not be too large, excessive watering, it is likely to cause some low-lying sections of water, some water will flow into the water pipes along the road, which would virtually caused the economic and water resources The waste. In areas where there is a lot of mud and sand, it is easy to form muddy conditions when the water is sprayed too much. This can cause secondary pollution of the road surface. In more serious cases, it may even lead to sewers. Blocked situation. After waiting for the road to dry, a relatively large area of ​​pollution will be formed, which will inconvenience the sanitation workers' cleaning work. (Text / Sun Ni)
IKIA Bike cotter pin
IKIA cotter pin is used for fixing chainwheel and crank tightly, so the chainwheel & crank with cotter pin also is called cotter pin type chainwheel & crank. It is made up of one bolt and one screw.we have CE, ISO9001:2008.
Key details:
Firstly , we could supply:
Bicycle Cotter Pin,Steel Bicycle Cotter Pin,Bicycle Crank Cotter Pin,Metal Bicycle Cotter Pin Hebei YIJIASHUN Trading Co.,Ltd , https://www.ikiabicycle.com
1>. All kinds of cotter pin for Bike Chainwheel & crank.
2>. All kinds of surface finished, such as, ED, CP, UCP, color.
3>. All kinds of packages , such as, Bubble bag , Polybag , Paper bag , Carton+woven bag etc.
Secondly, we can supply all kinds Preferential Tariff Certificate of Origin, such as, FORM E, FORM F, FTA etc.
Finally, any OEM and ODM are acceptable and realizable.