Fluorocarbon Metallic Bunding Powder Coating Fluorocarbon metallic bunding powder coating Fluorocarbon Metallic Bunding Powder Coating,Fluorocarbon Powder Coating,Bonded Metallic Powder Coating,Fluoropolymer Coating Vs Powder Coating Chongqing Yitumei New Materials Co., Ltd. , https://www.cqettume.com
**Technical Data for the Rubber Granule/SBR**
Mode
Diameter
L/D
Screw rotary
Main motor
Torque
Torque level
Output
TSE-75C
71mm
32-64
600 r/min
160 kW
1273 N.m
5.8 T/N³
400-600 kg/h
This extruder is designed to convert various types of plastic pellets (including ABS and PLA) into either 1.75mm or 3mm filament. It features two dies included, allowing you to switch between sizes easily. The hot end operates at temperatures between 200°C and 240°C, made from copper and high-quality aluminum for efficient heat dissipation.
The filament is spooled on the floor or in a box, ensuring continuous operation. This unit has been tested for multiple 48-hour runs without issues and can run for days with minimal supervision when using a hopper extension. The filament tolerance is 1.70mm (+/-0.05mm) and 2.95mm (+/-0.05mm).
It comes fully assembled and ready to use right out of the box—no kit required. The extrusion rate ranges from 0.5kg to 1kg per hour, depending on temperature and material. It runs on standard 110-120V household electricity. A detailed step-by-step manual is included, along with support via phone or email.
**Kit Includes:**
- 1 Fully assembled filament extruder
- 1kg of ABS pellets (to start immediately)
- 2 dies (for 1.75mm and 3mm filaments)
- Instruction manual with pictures and clear instructions
- Everything needed to begin extruding within 30 minutes of opening the package
**Certificate:**
**Shipment:**
Wooden cases or customized packaging available.
**Service System:**
**Before-sale:**
- Detailed product introduction
- Recommendation of suitable solutions
- Offer of testing
**During Manufacturing:**
- Provide layout and engineering conditions
- Offer screw plan and related documents
- Inform about project processing status
- Ensure the product meets technical specifications
**After-sale:**
- Installation, commissioning, and training
- Spare parts available
- Technical support and updates provided
**If you have any questions, please don’t hesitate to contact me or send an enquiry!**
**FAQ**
**1. Q: How about Haisi?**
A: Nanjing Haisi Extrusion Equipment Co., Ltd. is a high-tech company. Our team has extensive experience in R&D, manufacturing, technology, and service. We have been specializing in the extruder industry for over ten years and are a leading manufacturer of screw barrels in China.
**2. Q: What's Haisi capacity?**
A: Our company strictly follows CE and ISO9001 quality certification systems. We offer over 200 models of extruders and spare parts.
**3. Q: What's the delivery time?**
A: For standard sizes, we have finished and semi-finished stock. Customized orders take up to 2 weeks, typically 3–4 weeks.
**4. Q: Where is Haisi factory and how to reach there?**
A: Located in Lishui, Nanjing, Jiangsu Province. If you wish to visit, we can arrange pickup from the airport or train station.
**5. Q: How to contact us?**
A: Please reply directly to me if you have any questions.
**1.75mm 3D Printer PLA ABS Plastic Filament Extruder**
**Description**