What should be done after the battery is frozen? The following is the analysis of the cause of battery icing and general treatment methods. Analysis of the cause of battery icing: (1) The battery has a low specific gravity when it leaves the factory. The electrolyte reached a freezing point when used in cold areas. (2) After the battery is over-discharged, the specific gravity of the electrolyte drops more, but it is not charged in time. (3) The electrolyte liquid level is too low. After adding distilled water, the engine is not operated for a certain period of time, so that the upper and lower specific gravity of the electrolyte are inconsistent, and stratification occurs. General treatment method: The icy battery should be moved to a warm room to let it melt slowly; then charge the battery with 1/3 of the specified charging current, continuously observe the cell voltage and electrolyte temperature, and the specific gravity of the electrolyte should reach 1.28 g after charging. /cm3, if not in compliance, adjust with distilled water or sulfuric acid with a specific gravity of 1.40 g/cm3. 50 M3/h Concrete Batching Plants This product(concrete batching plant)mainly consists of 5 major systems such as mixer, material weighing system, material conveying system, material storage system and control system and other ancillary facilities. Hzs50 Concrete Batching Plant,Hzs50 Automatic Concrete Plant,Hzs50 Fixed Concrete Batching Plant,Hzs50 Smallconcrete Batching Plant Shandong Zeyu Heavy Industry Science and Technology Co.,Ltd. , https://www.zeyuconcretemachine.com
Features of concrete batching plant:
1.It adopts combined structure and unitized module, which is very convenient for installation and demolition
2.High performance twin-shaft, good mixing quality and high efficiency
3.Increase the unloading angle of the aggregate bin to solve the problem of unloading difficulties caused by rain
4.The electrical control system uses imported components, reliable performance and easy operation.