Instrumentation is a high-tech industry, instrumentation products are widely used in all areas of economy and society, whether it is control devices, optical instruments, or measuring instruments, analytical instruments, the accuracy of control and analysis of the measurement accuracy are high. Since the second half of 2013, the export of instrumentation products in our country tends to be stable. Due to the limited market size of the instrumentation industry, the export growth is expected to remain stable with an annual export volume of over 26 billion U.S. dollars, an increase of about 5%. The growth rate of imports will still be lower than that of exports The increase is 3% -5% and the import value is about 44 billion U.S. dollars. According to the statistics of the Customs, in 2013 China's total exports of instrumentation products were 25.37 billion U.S. dollars, up 6.2% over the same period of last year; imports were 42.29 billion U.S. dollars, up 3.8% over the same period of last year. Since 2001, China's instrumentation products import and export has maintained rapid and steady growth, only in 2009 by the impact of the international financial crisis declined, after rapid and temporary recovery in 2010 and 2011, the past two years and gradually Downturn. China's instrumentation products have long been in a deficit state of import and export trade. Since 2001, the trade deficit has continued to expand, and the deficit exceeded that of exports by 2006. However, since 2005, the export growth rate gradually started to surpass the import growth rate, the trade deficit increase gradually narrowed, and the deficit was also exceeded by the export volume. The trade deficit hit a record high of 17.16 billion U.S. dollars in 2011 and has since started to decline. In terms of exports, after experiencing a brief growth in the first half of the year, overall performance dipped in the first half of the year and growth remained stable in the second half of the year. On the import side, the monthly growth rate fluctuated greatly. In the whole year, the import and export increased slightly while the export growth continued to be higher than the increase in imports. Instrumentation products are divided into 12 categories. In terms of export, industrial automatic control systems and devices, optical instruments and medical instruments are the most important product categories with a rapid growth of export of 18.1% of industrial automatic control systems and devices, 11.1% of electrician instruments and meters, 14.6% of experimental and analytical instruments and Weighing 10.2%. Only the export of measuring instruments fell year on year. Industrial automation systems and devices, laboratory analysis equipment, medical equipment, optical instruments, electronic measuring instruments are the main categories of imports, the rapid import growth rate of optical instruments 20.9%, 15.8% of laboratory equipment and medical equipment 7.1% Imports of other product categories have declined to varying degrees. China's instrumentation products only in the technical content of the lower measuring instruments, scales, graphics and measuring instruments import and export trade in the surplus, the remaining categories of products are in the trade deficit, especially in high-tech industrial automation systems And devices, electronic measuring instruments, medical equipment trade deficit up. Asia is the main market for China's instrumentation products export, accounting for more than half, followed by Europe and North America, mainly the United States, accounting for 19% of exports, exports to the three markets also exceeded the average export growth. In addition, the decline in exports to Africa, Latin America and Oceania, especially in Africa, decreased significantly. The United States is the largest import and export market for instrumentation products in China with an export volume of 4.64 billion U.S. dollars in 2013, accounting for 18.3% of the total, up by 8.3% over the same period of last year. The United States imported 8.8 billion U.S. dollars, accounting for 20.8% of the total, up 9.2% Among the major export markets, exports to Japan only declined, while those for faster export growth included Taiwan, Singapore, Germany, the Netherlands and India, up 36.2%, 15.7%, 15.5%, 11.7% and 10.5% respectively. China imported 45.7% of instrumentation products from Asia, accounting for 32% of imports from Europe and 21.5% from North America, but imports from these regions showed a small increase, especially from Asia, which grew only 0.7% YoY. Faster regions are mainly Africa, the Middle East and Eastern Europe, mainly due to the smaller import base from these regions and more obvious fluctuations in the increase rate. In addition to the United States, Japan, Germany, South Korea and Taiwan provinces were the major countries and regions imported. However, the imports from Taiwan and South Korea grew rapidly at 14.9% and 12.1% respectively, while those from Germany and Japan increased by 3.7% And decreased by 8.7%. The proportion of instrumentation products exported by China through general trade accounted for 44.8% of the total, up 9.5%; exports accounted for 44.4% of the total, up 3.6%; processing trade was dominated by feedstock processing, accounting for 44.8% 41% growth rate of 5.1%. In strict accordance with ISO 9001:20015 and GB/HG Flanges; Gb Flanges,Hg Flanges,High Quality Gb Flanges,High Quality Hg Flanges Shanxi Tianbao Group Co.,Ltd. , https://www.tbflange.com
1.Make process card and quality plan
2.Choose the qualified raw material and do incoming test, not allowed
nonconforming material to enter into production process;
3.Producing and testing followed the quality documents
4.Be good at Quality records and product identification to ensure the product
traceability
5.Do the final inspection to ensure 100% of pass.