On July 25th at 23:43:3:35, an earthquake with a magnitude of 5.1 on the Richter scale occurred. The epicenter of the earthquake was in Lindian County, northwest of Daqing City. The county is an administrative territory of Daqing City, and is located away from the center of Daqing Oilfield. The wind, Wonglitun and Ranghulu districts are less than 100 kilometers away.

Daqing is China's largest oil and chemical production area. In 2004, it produced 46.40 million tons of crude oil, ranking first in the country. Although the epicenter occurred in Lindian County, the residents of Daqing City almost ran to the streets to prevent disasters when the first earthquake occurred. The 5.1-magnitude earthquake only destroyed several houses in Lindian County, injuring 6 people. At present, there is no loss of other people and property. It is reported that by 12 noon on the 26th, the aftershocks of Daqing City have appeared more than 30 times, but the magnitude has not exceeded 5.1.

At 11 am on the 26th, the reporter contacted the Daqing Petrochemical Company Fertilizer Plant located in Wolitun District, Daqing City and the Heilongjiang Petrochemical Plant in the Hulu District. It was confirmed that the earthquake did not damage the production facilities of the two companies and the production operation was not affected. influences. After contacting the Daqing Petroleum Administration Bureau at 13:00 noon, it was learned that the oil pipelines and production equipment that were operating in the Baili Oilfield were also not affected by the earthquake and the production conditions were normal.

At present, the Daqing municipal government and local oil and chemical companies are paying close attention to the dynamics of the earthquake and begin to check the safety of all production facilities and strive to find and solve problems as soon as possible.

The main components of Shine Core Veneer Dryer is as follows:1.Drying system :the Veneer Dryer  adopts the most scientific drying principle ,and the hot air in the hot air stove is injected directly into the upper and lower bellows of the machine by centrifugal blower. The hot air blows to the upper and lower sides of the running veneer through the nozzles of the upper and lower bellows, so that the veneer is heated evenly and thus plays the role of drying 2.Control system: Adopt endless gearbox to adjust feed speed according to your veneer thickness and moisture content to achieve ideal drying effect. 3.Transmission system :the veneer is fed  into the machine through the feed inlet vertically, and the chain drives the upper and lower rows of rollers, running relatively. The veneer moves forward by the self-weight pressure of the upper roll, and during the veneer passes through the two rollers and the upper and lower air nozzles, it achieves the effect of drying and ironing. So the veneer dried by this machine is flat, smooth and without marks. 4.Heating system:Steam heating, heat conduction oil heating, hot stove type heating,waste wood or other biomass materials. Users can choose one most suitable model.    but biomass fuel is the most economic one which can save the drying cost to the user to the most .

Core Veneer Dryer

Branch Shredder,Core Veneer Dryer,Plywood Veneer Dryer,Plywood Veneer Dryer Machine

Shandong Shine Machinery Co.,Ltd , https://www.shinewoodmachine.com