*. PTC heating,overheat protection, work quiet.
What is the heating effect of the air heater? Electric Heaters,Room Heater,Mini Heaters,Desk Heater Shenzhen Ewong Technology CO.LTD , https://www.ewong-tech.com
Technical data:
Fluid Pressure
Max 1.6MPa (232Psi)
Control Pressure
0.3Â -Â 0.8MPa(43.5-116psi)
Control Fluid
Neutral gas, air
Body Material
CF8M/CF8
Seals  Material
 EPDM/FKM
Applicable Fluid
FKM-Suitable for most fluid,except for steam. EPDM-Suitable for steam and hot water,unsuitable for oils,greases,fuels etc.
Fluid Temperature
-20ºC - +150ºC
Ambient Temperature
-20ºC - +80ºC
Control Type
Normally closed,Normally open,Double acting
Connection
Flange ends,Flange specfiction:JB/T82.1-1994;DIN2543-2000.
Applications:
1.Beer&Drinks Filling Machinery
2.Textile Printing&Dyeing
3.Gas Industry
4.Pharmacy & Medical Equipment
5.Rubber Machinery
6.Chemical Industry
7.Disinfection
8.Frothing Equipment
9.Water/sewage Disposal
Advantages:
·Compact structure,Stainless Steel body,Any mounting Position.Adopt Stainless steel body.
the appearance of high-grade,corrosion resistance.The piston and sealing ,long life and easyÂ
installation , can be arbitrary diraction.
·Operating fast,Large flux, Low pressure loss body medium flow better,because the pressure
in the seat almost Yin forces the pistons,so fasts switching speed and pressure loss.
·Resistance to vacuum
Perfect sealing,could work in vacuum 740mm Hg(Relative vacuum)
OUR PARTNERS:
CONTACT US
Founded in 2001, we are specialized in design & manufacture stainless steel valve for industrial fluid control system. Our products include pneumatic angle seat valve, shuttle valve, ball valve, butterfly valve, pressure reducing valve, steam trap, check valve and strainer, which are widely exported to USA, Europe, Asia, Africa, in total 62 countries.
Technical data:
Fluid Pressure
Max 1.6MPa (232Psi)
Control Pressure
0.3Â -Â 0.8MPa(43.5-116psi)
Control Fluid
Neutral gas, air
Body Material
CF8M/CF8
Seals  Material
 EPDM/FKM
Applicable Fluid
FKM-Suitable for most fluid,except for steam. EPDM-Suitable for steam and hot water,unsuitable for oils,greases,fuels etc.
Fluid Temperature
-20ºC - +150ºC
Ambient Temperature
-20ºC - +80ºC
Control Type
Normally closed,Normally open,Double acting
Connection
Flange ends,Flange specfiction:JB/T82.1-1994;DIN2543-2000.
Applications:
1.Beer&Drinks Filling Machinery
2.Textile Printing&Dyeing
3.Gas Industry
4.Pharmacy & Medical Equipment
5.Rubber Machinery
6.Chemical Industry
7.Disinfection
8.Frothing Equipment
9.Water/sewage Disposal
Advantages:
·Compact structure,Stainless Steel body,Any mounting Position.Adopt Stainless steel body.
the appearance of high-grade,corrosion resistance.The piston and sealing ,long life and easyÂ
installation , can be arbitrary diraction.
·Operating fast,Large flux, Low pressure loss body medium flow better,because the pressure
in the seat almost Yin forces the pistons,so fasts switching speed and pressure loss.
·Resistance to vacuum
Perfect sealing,could work in vacuum 740mm Hg(Relative vacuum)
OUR PARTNERS:
CONTACT US
*. Large hot air outlet, instant get warm and hot.
*. One key and Two gear heating air optional.
*. Novel and beautiful design, easy to operate.
*. Work quietly and safe, natural warm breeze.
The heating effect of the air heater is not good. Where do you use it? Relatively speaking, the heating effect of the air heater is very good compared with other heating equipment. The air heater is also called industrial air heater, which has a wide range of applications,
Factory workshop: because the workshop space of many large factories is relatively large, it is basically impossible to use ordinary heating methods in such a large space, and it will also cause a lot of waste of infrastructure construction costs and later operation costs. At this time, you need to install industrial air heaters in your workshop. They are specially designed for tall spaces.
Material warehouse: many material warehouses have poor ventilation, and some are directly underground warehouses. They are easy to be wet without sunshine, especially in winter. At this time, it is only necessary to equip an industrial air heater in the material warehouse, which can not only keep warm, but also moisture-proof and dry. The key is to move easily and facilitate the oil mine: for some workers working under the mine, the underground working environment is very bad. Only by improving the working environment can work efficiency be improved, so the heating project is launched, In order to bring greater economic benefits to business owners. At the same time, for some energy mines, it is more related to heating safety, but the industrial heating function is very good and competent for this work
Model NO.: 200 Series
Fluid Temperature: -20ºC - +150ºC
Ambient Temperature: -20ºC - +80ºC
Control Type: Normally Closed, Normally Open, Double Acting
Connection: Threaded(Bsp, BSPT, NPT )
Trademark: ESG
Transport Package: Seaworthy or Airworthy
Specification: CE, ISO9001, CU-TR
Origin: China
HS Code: 8481
Model NO.: 200 Series
Fluid Temperature: -20ºC - +150ºC
Ambient Temperature: -20ºC - +80ºC
Control Type: Normally Closed, Normally Open, Double Acting
Connection: Threaded(Bsp, BSPT, NPT )
Trademark: ESG
Transport Package: Seaworthy or Airworthy
Specification: CE, ISO9001, CU-TR
Origin: China
HS Code: 8481
Founded in 2001, we are specialized in design & manufacture stainless steel valve for industrial fluid control system. Our products include pneumatic angle seat valve, shuttle valve, ball valve, butterfly valve, pressure reducing valve, steam trap, check valve and strainer, which are widely exported to USA, Europe, Asia, Africa, in total 62 countries.