Model NO.: DSG-01, DSG-03, 4WE6, 4WE10 Series
Power Supply: AC and DC
Usage: Direction Control
Standard: GB
Application: Industrial Usage
Max.Pressure: 31.5MPa
Max.Flow(DSG-01,4we6): 63L
Max.Flow(DSG-03,4we10): 120L
Trademark: Seric
Transport Package: Carton Box/Wooden Case
Specification: DSG-01, DSG-03, 4WE6, 4WE10
Origin: Guangzhou
HS Code: 8413910000
Features
These are epoch-making solenoid operated directional valves of high pressure, high flow which have been developed incorporating a unique design concept into every part of the valve including the solenoid. With wet type solenoids, these valves ensure the low noise and the long life, moreover, ensure no leakage of oil outside of the valve.
Stable Operation
With a strong magnet and spring force, the valves are tough against contamination and thus ensure a stable operation.
Solenoids
Solenoid Connectors (DIN connector)
The solenoid connectors are conform to the international standard ISO 4400 (Fluid power systems and components-Three-pin electrical plug connectors Characteristics and requirements)
AC Solenoids
50 to 60 Hz common service solenoids do not require rewiring when the applied frequency is changed.
DC Solenoids (Reputable K-series)
These DC solenoids have surge absorbers for K-series functions. The three advantages of them are as mentioned below:
1. Since surge voltage can be controlled to a very low figure, electric control devices, such as a computer, can be used without any interference like noise.
2. There being no spark between contacts, the life of the relay becomes longer.
3. Time lag for spool return after de-energisation of the solenoid is very short.
DSG-01-3C2
DSG-01-3C3
DSG-01-3C4
DSG-01-3C9
DSG-01-3C60
DSG-01-3C10
DSG-01-3C12
DSG-01-2D2
DSG-01-2B2
DSG-01-2B3
DSG-01-2B8
 
DSG-03-3C2
DSG-03-3C3
DSG-03-3C4
DSG-03-3C60
DSG-03-3C10
DSG-03-3C12
DSG-03-2D2
DSG-03-2B2
DSG-03-2B3
DSG-03-2B8

 
4WE6E
4WE6H
4WE6J
4WE6Q
4WE6G
4WE6M
4WE6L
4WE6D
4WE6A
4WE6Y
4WE6B
4WE6-D/OF
4WE10E
4WE10H
4WE10J
4WE10Q
4WE10G
4WE10M
4WE10U
4WE10L
4WE10D
4WE10A
4WE10Y
4WE10B
4WE10-D/OF

Specifications
Valve Type Model
Numbers
Max. Flow
L /min
(U.S.GPM)
Max. Operating
Pressure
MPa (PSI)
Max. T-Line
Back Pres.
MPa (PSI)
Max. Changeover
Frequency
min-1 (Cycles/Min)
Approx. Mass
(kg)
Standard
Type
DSG-01-3C∗-∗-50 63 (16.6) 31.5 (4570)
{Spool Type 60 Only
25 (3630)}
16 (2320) 300
{R Type Sol. Only}
120
2.2
DSG-01-2D2-∗-50 2.2
DSG-01-2B∗-∗-50 1.6
Shock less
Type
S-DSG-01-3C∗-∗-50 40 (10.6) 16 (2320) 16 (2320) 120 2.2
S-DSG-01-2B2-∗-50 1.6
Solenoid Ratings 
Valve Type Electric source Coil
Type
Frequency
(Hz)
Voltage (V) Current & Power at Rated Voltage
Source Rating Serviceable Range Inrush (A) Holding (A) Power (W)
Standard
Type
 
Shock less
Type
AC A100 50 100 80 - 110 2.42 0.51 ―
60 100 90 - 120 2.14 0.37
110 2.35 0.44
A120 50 120 96 - 132 2.02 0.42
60 108 - 144 1.78 0.31
A200 50 200 160 - 220 1.21 0.25
60 200 180 - 240 1.07 0.19
220 1.18 0.22
A240 50 240 192 - 264 1.01 0.21
60 216 - 288 0.89 0.15
DC
(K Series)
D12 ― 12 10.8 - 13.2 ― 2.45 29
D24 24 21.6 - 26.4 1.23
D48 48 43.2 - 52.8 0.61
AC→DC     Rectified (R) R100 50/60 100 90 - 110 ― 0.33 29
R200 200 180 - 220 0.16
Model Number Designation
F- S- DSG -01 -2 B 2
Special
Seals
Shock less
Type
Series
Number
Valve
Size
Number
of Valve
Positions
Spool-
Spring
Arrangement
Spool
Type
F;
For Phosphate
Ester Type
Fluids
(Omit if not
Required)
None:
Standard
Type
DSG:
Solenoid
Operated
Directional
Valve
01 3 C:
Spring
Centered
2,3,4,
40,60,9
10,12
2 D:
No-Spring
Detened
2
B:
Spring
Offset
2,
3,
8
S:
Shock
less
Type
3 C:
Spring
Centered
2
4
2 B:
Spring
Offset
2
 
A -D24 -C -N -50 -L
Special Two
Position Valve
(Omit if not Required)
Coil
Type
Manual
Override
Electrical
Conduit
Connection
Design
Number
Models with Reverse Mtg. of Solenoid
(Omit if not required)
― AC:
A100  A120
A200  A240
DC:
D12 D24 D48
R:
(AC→DC)
R100 R200
None:
Manual
Override
Pin
C :
Push
Button
and
Lock Nut
(Option)
None:
Terminal
Box Type
 
N:
Plug-in
Connector
Type
N1:
Plug-in
Connector
Type with
Indicator Light
(Option)
50 ―
― ―
A
B
L
― DC:
D12 D24 D48
R:
(AC→DC)
R100 R200
―
― L

Hydraulic Oil Solenoid Operated Directional Valves

Hydraulic Oil Solenoid Operated Directional Valves


 

Machining Plastic has a small density, light weight, can be insulated. machining Plastic  is the use of CNC machining out, including drilling. Cutting, turning,  machining Plastic commonly used products are: PA PC, Tetlon POM, PMMA. , we have a special inspection room to test the products, to ensure that and each size in line with the requirements of the drawings, but also a special machine for the production of material to withstand voltage insulation test. Applied in a variety of industries, including: drone, ship, communications, medical equipment, industrial automation equipment.

Machining Plastic

Machining Plastic,Oem Precision Machining Plastic,Cnc Machining Plastic,CNC Plastic Machining

Buildre Group Co., Ltd --- Hong Kong RYH CO., LTD , https://www.bldcncmachining.com