Many people know the road sweeper, but if they lift the truck, they have little knowledge of it. In fact, high-pressure cleaning vehicles are also called vehicles that are specialized in loose pipes. Its working principle is to use the strong pressure caused by the high-pressure water flow to flush away the sediment and dead-end dirt from the pipelines on public facilities. Of course, most of the cleaning vehicles are also equipped with sprinkler facilities. They are used for road cleaning, greening of parks, dusting of squares, and so on. When necessary, it can also be used for fire rescue. This shows how powerful the high-pressure cleaning vehicle is. Below, we will introduce in detail the working principle of the undercarriage and hope that everyone will have a correct understanding of such special vehicles. In fact, it is not difficult to understand the principle of a high-pressure cleaning vehicle . When this type of cleaning vehicle is designed, it is a rotating method that inserts a bendable and elastic wire that is carried by the body into a pipeline of a blocked public facility. Put all the cloth, hair, garbage, and dirt that are stuck in the pipe. The high-pressure cleaning vehicle also carries a tool called shot pass. From practical use, it uses the principle of air pressure to create a device that specifically dredges the sewer pipe, and it immediately responds to the plugging effect of the city's sewage pipeline. In addition, the high-pressure cleaning vehicle also uses the principle of skin tweezers that we talk about in our daily lives, and removes the contaminated objects that are clogged in the sewage pipeline. In particular, certain industrial-specific pipelines cause plugging due to the retention of industrial pollutants. At this point the use of traditional high-pressure cleaning vehicles can not achieve the purpose of clearing the pipeline, because the size of industrial pipelines and urban sewage pipelines are not the same, the use of dredging methods are also very different, this time can only be achieved using the working principle of Clearing and cleaning of pipeline jams. In the work process of the high-pressure cleaning truck , high-pressure water pumps are also specially equipped to deal with the sewer sediments that are seriously blocked in urban sanitation cleaning. Of course, the high-pressure water pump equipped on this type of cleaning vehicle can also be used in industrial liquid pipe discharge, wall cleaning, and has the function of watering, transporting water and flushing the ground. The above descriptions are the basic working principles of the road sweeper. I hope that after reading it, we can have a correct understanding of the use of such washing vehicles.
About Polyester Slings for Lifting
Polyester is a synthetic (man made) material that is extremely light weight and when made into lifting slings makes a very little cost effective lifting sling. The material is soft to touch (hence soft slings) and therefore is less likely to cause damage to the goods when they are lifted and will not cause the type of injuries to the user associated with Wire Rope Sling, for example cuts caused by broken wires, manual handling or impact injuries. Synthetic polyester (fiber material) slings are much lighter weight than both wire rope or chain slings and therefore this type of lifting sling is much easier to handle.
It is include Webbing Sling
Round Sling
Application
How to use slings
1. Never use slings with damages or defects.
2.Use slings with clear identifications.
3.Check working load Limit ,length and working position
4.Never use slings with knots.
5.Never use slings on sharp edges without correct protection .
6.Use the correct mode factor and check lifting angle.
7.Trapping the sling when lowering the load should be avoided.
8.The temperature should be between -40℃ and 100 ℃.
9.Stitching should not be placed over hooks or others lifting devices.
10. Sling should be stored in dry and clear conditions .Away from heat sources, direct sunlight and UV rays.
11.In case of chemical environment ,please check with the manufacturer.
12.Elongation rate <3% at working load and <10% at breaking load
CAUTIONS
1. Do not exceed working load limit
2. Prevent shock-loading.
3. Where selecting a sling it is very important to consider the angles at which the sling will be used.
4. Slings are subject to cutting when lifting items with sharp edges. In this case always use wear sleeve
5. Do not use a damaged sling.
6. Never make knots in a sling.
7. Never drag a sling from underneath a load that is resting on it.
8. Chemical active environments can affect the strength
9. Always store slings in a cool dry and dark place when they are not in use for prolonged periods.
10. Always read and understand the operating instruction before use.
Reliable Sling
Since 2007
Our Services
1.We treasure and try to understand all the different needs of our clients and seek to forge a long term professional relationship with them. The satisfaction of each and every customer is our main goal and motivation in conducting our business.
2.Our products are of high-quality standards and always come with the certificate of compliance by the manufacturers. There is the strict quality control for each of our products.
Lifting Belt Lifting Belt,Lifting Belt Sling,Polyester Lifting Belt,Lifting Sling Belt Hebei Liston Lifting Rigging Manufacturing Co., Ltd. , https://www.liftingriggingfactory.com
Specializing in webbing slings, towing strap, Ratchet Tie Down.
Consecutive sales increasement of 10 years
Passed the ISO9001:2008 and international certificate as CE, GS and TUV etc.
Provide OEM and ODM service to overseas customer
Export to more than 40 countries, mostly in European countries, America, Africa, Middle-east.
Our mission is to create high-quality, high-end products, allowing customers to use more convenient, more secure, more assured.