Flat disk Rotary Damper mainly used for large diameter, small height space. Disk dampers provide energy absorption and rotational deceleration. We offer many different models from mild to extreme. Our disk dampers are the perfect solution for a wide range of applications, from scanner, and glove boxes to auditorium seating to. Disk dampers are designed to control and smooth out the opening and closing of lids, and doors.
Our damper is
conducive to performing structural movement in soft, silent and safe
environment, mitigating impact load, avoiding strike damage, prolonging
mechanical life, reducing noise disturbance, improving product quality and
improve customer satisfaction.
NOTE:
Applied torque:(T)
The damper square hole coordinateswith the rotation axis dimension tolerance.
Disk Damper,Adjustable Dampers,Excavator Disk Damper,Spare Disk Damper,Oval Disk Damper Shenzhen ABD Equipment Co., Ltd. , http://www.abddamper.com
In the measurement phase of the temperature and humidity monitor, the SCM sends a temperature and humidity measurement command to the temperature and humidity sensor every 10 seconds, and receives the raw temperature and humidity data of the output and sends it to the data storage chip for temporary storage. When the query subroutine queries the measurement time, the temperature and humidity data measurement is stopped. After the measuring body is to be taken out, it is connected to the host computer through the RS-232 serial communication interface so that it enters the data transmission mode.
The PC on which the baking system software is located has master control of the serial transmission bus. The temperature and humidity monitor measures the body as a slave and responds to the host's various commands. First, the host sends a data transfer instruction to the slave as a sender and the slave accepts the transfer instruction as a receiver. Second, the slave and the sender send data to the serial bus. The host reads the data from the serial bus as a receiver. data.
Because the original data of temperature and humidity received is in the form of binary, and it has certain dependence on the power supply voltage and measurement accuracy of the sensor, the software of the baking and drying system performed by the temperature and humidity monitor needs further correction and conversion. The final temperature and humidity data are obtained. The final temperature and humidity data will be stored in the form of a file on the host computer, which can be printed, moved, and stored at any time.
1. Please contact the corresponding product engineer for specific torque products.
2. Max. rotation speed: 50r/min
3. Max. circle rate: 6 cycle/min ( Clockwise360 °, 360 ° anti-clockwise for 1 cycle)
4. Operating temperature: -10~50℃
5. Storage temperature:-30~80℃
NO.
Description
Material
1
Shell
SPFC
2
Cover
SPFC
3
Shaft
PA/POM
Test Temperature: 23+/-5℃
Rotating speed: 20r/min
Durability test Metho: Clockwise 360 °, 360 °anti-clockwise
Rotating speed: 20r/min
Test Frequency: (1cycle/min)
Test Temperature: 23±5℃
Durability test cycle: 50000 cycle
Test result criteria: Store in the room temperature for 24 hours or more after the test, recording to the torque T=T±30%T.
With the development of modern science and technology, more and more scientific and technological instruments have replaced artificial applications in agricultural cultivation, especially in greenhouses. For example, the use of temperature and humidity monitors is a common one. The application of this instrument from the simple sensor design in the past to the application of a modern single-chip computer has resulted in better measurement accuracy.