From the Spring Festival this year to the current four-month period, the fertilizer market once again demonstrated the off-season prices, which are not faded during the off-season and are not booming during the peak season. Zhuo Chuang Information Nitrogen Fertilizer Analyst Han Jian told reporters that since 2008, the fertilizer market has begun to show the off-season is not light, not busy season. This year is no exception. February was in the stage of spring plough preparation and was a traditional off-season. As a result, urea prices rose rapidly from 1,930 yuan/ton in one month to 2010 yuan/ton at the end of February, one ton rose by 80 yuan, and production and sales were booming in the off-season. Into the spring plowing stage in March, is the traditional season, production companies and sales companies are eagerly trying to earn a pour, the result of urea prices began to crumbling, followed by all the way down, to the end of April, the price actually fell to 1880 Yuan/ton, even lower than the low season price of 1930 yuan/ton at the beginning of February; entering into spring in May, the end of spring plowing, entering the off-season, the price began to rise rapidly again, the current price has stood at the high of 2020 yuan/ton, setting a record in the off-season The highest price of urea this year. Han Hongmei, deputy director of the Department of Chemicals of the Petroleum and Chemical Industry Planning Institute, pointed out that the high prices in the off-season in February were due to the fact that dealers all over the country were taking large quantities of goods from the production companies, preparing springs for spring and spring in March and April, and the huge demand resulted in off-season prices. Not low. By March, the distributors had to release inventory to the market, but at the same time, the production companies hoped to increase their load in the peak season and hoped to make more profits. Therefore, they used full horsepower to produce fertilizer. In addition, there are many small businesses in the country that have suspended their production during the off-season and wait until the peak season. These have led to an excessive amount of fertilizer on the market during the peak season. Under such circumstances, manufacturers and distributors have tried their best to market and promote, and even hesitate to cut prices to reduce inventory and ease the tension in the supply of funds. Therefore, the peak season is no longer prosperous. PVC Non metallic Liquid Tight Connector
PVC No-nmetallic Liquid Tight Connector descriptions:
1.No-nmetallic Liquid Tight Connector-Straight
Pipe Fittings Sizes:
More services we offer:
1 1/4 liquid tight conduit fittings,1 inch liquid tight conduit fittings,american fittings liquid tight,american fittings liquid tight connectors,liquid tight conduit connector 3/4 Timeplex Industrial Limited , https://www.timeplexhk.com
2.UL list
3.Straight Nonmetallic liquid-tight connectors are used to terminate andseal Liquid -Tight Flexible Nonmetallic Type B Conduit to either an oil-tight, liquid-tight or rain-tight box or enclosure.Connectors can beused with tapered thread femaleentry or unthreaded knock-out using the provided sealingwasher and locknut.
4. Resists Salt Water, Weak Acids, Gasoline, Alcohol,Oil, Grease and Common Solvents
5. No Disassembly Required
6.Reusable
pvc pipe sizes chard id od inner diameter outer diameterAs mentioned in a previous blog post about PVC pipe outer diameter, PVC pipe and fittings use a nominal system for standard sizing. This is so all parts with the same size in their name will be compatible with each other. All 1" fittings will fit on 1" pipe, for example. That seems pretty straightforward, right? Well here's the confusing part: the outer diameter (OD) of PVC pipe is greater than the size in its name. That means that 1" PVC pipe will have an OD that is greater than 1", and a 1" PVC fitting will have an even larger OD than the pipe.
The most important thing when working with PVC pipe and fittings is the nominal size. A 1" fitting will fit on a 1" pipe, regardless of whether either one is schedule 40 or 80. So, while a 1" socket fitting has an opening wider than 1" across, it will fit on a 1" pipe because the OD of that pipe is also greater than 1".