Technical specifications
Capacity
3.5-2400 m3/h
Head
8-150 meter
Working Pressure
up to 1.6 Mpa
Test Pressure
2.5MPa
Temperature range
-20ºC~110 ºC
√ ES series Single-stage End-suction Horizontal Centrifugal Pumps Advantage have to say!!
1.SAVE PLACE.  √Â
These series pumps have an integrally Horizontal structure, beautiful appearance and less area of occupied land, which , comparing with the ordinary ones, is reduced by 30%.
2. Stable running, Low noise , High concentricity of assembly.  √Â
By the straight joint between the motor and the pump, the middle structure is made simplified, thus enhancing the running stability, making the impeller of a good balance of moving-resting, resulting in no vibration during running and improving the environment of use.
3.NO LEAKAGE  √Â
A mechanical seal of antiseptic carbide alloy is used for the shaft sealing so as to get rid of the serious leakage of the fillings of centrifugal pumps and ensure the operating place clean and neat.
4. EASY SERVICE  √Â
Service can be easily done without removing any pipeline because of the back-door structure.
5. VARIOUS INSTALLATION Type  √Â
Viewing from the inlet of the pump, the outlet of it can be mounted in one of the three ways, horizontally leftward, vertically upward and horizontally rightward.Â
√ Where can use our ES series Single-stage End-suction Horizontal Centrifugal Pumps ?
- Transport pure water and other liquids of the similar physical nature as pure water
- Water supply and drainage in industries and cities
- boost water-feeding of high buildings
- Park/Garden Irrigation
- Fire-fighting boost
- Remote mater-transportation
- Warming or cold-hot water circulation
- Boost in bathrooms
- Equipment completing as well.  
√  STRUCTURE DESCRIPTION of  Single-stage End-suction Horizontal Centrifugal Pumps?
Working condition
1.Pump inlet pressure is less than 0.4MPa
2.Pump system that is to say the pressure at the suction the stroke ≤1.6MPa, please notify the pressure for the system at work when ordering.
3.Proper medium: the medium for pure-water pumps should have no corrosive liquid and the volume of non-melting medium solid should not be over 0.1% of the unit volume and the graininess less than 0.2mm. Please notify at order if the medium to be used with small grain.
4.No larger than 40ºC of the ambient temperature, no higher than 1000m of the above-sea level and no more than 95% of the relative humidity.
Â
No
Name
Quantity
No
Name
Quantity
1
Pump casing
1
6
Water-bloching ring
1
2
Impeller
1
7
Plug
1
3
Impeller nut
1
8
Foundation
1
4
Mechncial seal
1
9
Motor
1
5
Pump cover
2
Â
Â
Â
About Us 
Production process
International Certificate
Service
Twenty years design and engineering experience and More than ten years over sea market Experience. Tongke provide most professional and thoughtful Pre-sales and After service.
Technical training                  Equipment evaluation
Installation and debugging    Troubleshoot
Maintenance                          Update and improvement
Commitment to the service
1.One-year warranty. Provide technical support free all-life of the products.
2.Keep all-life contacting with clients, get feedback on use of the equipment and make the products quality continually perfected.
3.Hot-line of service is available in 24h, responded in 8h.
Your call and mail is welcome at any time
Contact
Mr Seth Chen
Telphone
0086-13817768896
Model NO.: ES
Position of Pump Shaft: Horizontal Pump
Pump Casing Combined: End Suction Type
Mounting Height: Suction Centrifugal
Impeller: Closed
Usage: Pump, Pumps, Condensate Pump
Advantage: Low Noise, High Effiency
OEM: Ok
Certificate: ISO
Paint: Customer Specified
Trademark: TONGKE
Transport Package: Wooden-Case
Specification: DN50-DN400
Origin: China
HS Code: 8413709990
ES series Single-stage End-suction Horizontal Centrifugal Pumps for Building