HONYESD®Esd Antistatic PC Sheet Rod is base material of anti-static PC board is PC, which is a colorless and transparent amorphous thermoplastic material. , that is, a layer of antistatic hard film is formed on the surface of ordinary PC boards by plating technology. On the basis of perfectly retaining the inherent physical properties of the substrate, it also has an excellent function of eliminating static electricity. The surface resistance value is in 106 to 108 ohms is the best state of anti-static function, which can effectively prevent the accumulation of dust and avoid the possible harm caused by static electricity, so as to meet the special requirements of the industry in the high-tech era.
HONYESD®Esd Antistatic PC Polycarbonate sheet clear plastics sheet
1.22 g/cm
Clear, other color can be customized
The surface resistance value
10^6-10^9 Ω
The flame retardant rating
UL-94: V-0 ~ V-2
HONYESD®Esd Antistatic Pc Sheet Rod characteristic
The anti-static PC board is characterized by strong impact resistance and high temperature resistance of 120 degrees Celsius. The PC board has excellent flame retardancy and fire resistance (the flame retardant grade is UL-94 V-0 V-2, and the thickness is more than 6mm. The grade can reach V-0, the light transmittance is 83%, the anti-static PC board is manufactured by extrusion method, and the thickness tolerance is generally 3-5 wires; it has the characteristics of high mechanical strength and excellent processing performance.Super impact resistance and high temperature resistance are outstanding, and the surface resistance value is 106 to 108 ohms .
The manufacturing process of anti-static PC board is extrusion method, and the thickness tolerance is generally 3-5 wires. Through special processing technology, on the basis of perfectly retaining the inherent physical properties of the substrate, it also has an excellent function of eliminating static electricity, which can effectively prevent the accumulation of dust and avoid the possible harm caused by static electricity, so as to meet the needs of the high-tech era The special needs of the industry.
The plate has the characteristics of high mechanical strength and excellent processing performance. The antistatic performance can be tested by using professional instruments: â‘ surface resistance tester to detect the surface electrostatic effect of the plate; Above 100V, it is not a qualified anti-static product.
Properties of Permanent Antistatic/Conductive Sheets:
With the rapid development of the electronics industry, the integration of electronic circuit boards is getting higher and higher. The high density of electronic components on the motherboard, the compact wiring, and even the widespread use of surface mount components can easily lead to electrostatic damage to electronic components. Using PC antistatic transparent sheet to make applications can reduce the electrostatic damage caused by many equipment/buildings, which is full of safety.
HONYESD®Esd Antistatic Pc Case
1.Clean room partition Anti-static partition can effectively prevent dust adsorption and static voltage generation in the clean room.
2.Precision equipment cover In order to ensure the normal operation of automation equipment without causing harm to surrounding personnel, it also plays a role in dust-proof equipment.
3.The test fixture avoids the deviation caused by static electricity to the greatest extent, which will affect the test data.
Esd Polycarbonate Pc Sheet,Esd Antistatic Pc Sheet,Polycarbonate antistatic sheet,PC-300â„¢ ESd Polycarbonate,ESD PC Hony Engineering Plastics Limited , https://www.honyplastic.com
**Product Description**
**New Type Crumb Rubber Machine / Tyre Recycling Machine / Rubber Tire Recycling System**
**Output:** 800-1000KG/HOUR for 20-30 MESH Rubber Powder
**1. General Overview**
This production line includes main equipment and auxiliary devices, designed for recycling waste tires and other rubber materials (such as steel and textile tires). The final products include rubber powder, fiber, and steel wire.
**1. Tire Wire Extractor**
The first step in the tire recycling process.
- Heavy-duty construction
- Hooks and cross-pulling die made from 45# steel, heat-treated and quenched
- Equipped with a protective frame for safety
- Available in hydraulic or mechanical models
- Easy to operate and replace parts
**Model:** LSJ 1200
**Capacity:** 20-40 tires/hour
**Pulling Force:** 13 T
**Max Tire Diameter:** 1200mm
**Power:** 11KW
**Stroke Distance:** 1300mm
**Dimensions:** 3.6 x 0.78 x 1.02m
**Weight:** 1200KG
**2. Tire Cutter QDJ-1200**
Used to cut tires into smaller pieces before shredding.
- Knives made of YG-20 steel for long-lasting use
- Hydraulic control system
- One clamping cylinder and one cutting cylinder
- Equipped with a roller platform for large tires
**Capacity:** 1200kg/h
**Motor Power:** 5.5KW
**Tire Range:** Max 1200mm
**Dimensions:** 2080 x 1000 x 2130mm
**3. Whole Tire Shredder & Conveyor Belt**
**Model:** ZPS-900
- Designed for high-capacity size reduction of whole tires into 50x50 mm chips
- High torque at low speed ensures efficient cutting even of strong tires
- Precise knife tolerances reduce energy consumption
- Cutting knives made from alloy steel, re-sharpenable for extended life
- Wear-resistant lining inside the cutting chamber
- Large doors for easy access
**Feeding Specification:** ≤900mm whole tires
**Discharge Size:** ≤50x50mm
**Capacity:** 1000-1500kg/h
**Main Motor:** 37KW x 2 = 74KW
**Dimensions:** 2.8 x 2.1 x 2.4m
**Number of Knives:** 18 PCS
**Rotary Speed:** ~20 rpm
**Weight:** 7.0 Tons
**4. Big Conveyor Equipment**
Transports the rubber block into the crusher.
**5. Tyre Crusher (Bearing Bush)**
**Model:** XKP-560
**Front Roll Diameter:** 560mm (Smooth)
**Back Roll Diameter:** 510mm (Groove)
**Working Length:** 800mm
**Linear Speed:** 25.56 m/min
**Ratio:** 1:1.30
**Max Gap:** 15mm
**Motor Power:** 75KW
**Dimensions:** 5070 x 2290 x 1980mm
**Weight:** 190,000kg
**Purpose:** Crushes rubber blocks into powder and granules
**6. Big Shaking Screen**
Separates rubber granules and powder, sending granules back for further crushing and powder to the magnet separator. Also separates textile cords from the rubber powder.
**7. Small Conveyor Equipment**
**8. Big Magnet Separator**
Removes small metal fragments from the rubber powder.
**9. Small Shaking Screen**
**10. Small Magnetic Separator**
**11. Fiber Separator**
**Model:** FS-1100
**Capacity:** 200-500kg/h
**Motor Power:** 5.5KW
**Dimensions:** 1.5 x 1.5 x 3.4m
**Weight:** ~1.5T
No
Name
Model
Quantity
Power Consumption (KW)
1
Single Hook Debeader
LSJ-1200
1
11KW
2
Tire Cutting Machine
QDJ-1200
1
5.5KW
3
Tire Conveyor
SJ-900
1
2.2KW
4
Whole Tire Shredder
ZPS-900
1
75KW
5/7
Big Conveyor Equipment
BCL-8
2
4.4KW
6
Rubber Crushing Mill
XKP-560
1
75KW
8
Small Conveyor Equipment
BCL-3
1
1.1KW
9
Big Magnet Separator
BMS22
1
2.2KW
10
Small Magnet Separator
SMS-1
1
1.1KW
11
Big Shaking Screen
BSS-8
1
7.5KW
12
Small Shaking Screen
SSS-3
1
3KW
13
Fiber Separator
FS-1100
1
11KW
Name
Brand
HONYESD
Size
Thickness 2-100mm 1000x2000mm 1200x2400mm 1212x2424mm
Density
Color
(1) It does not depend on humidity and can ensure the effectiveness of use under harsh conditions;
(2) Excellent light transmission performance, no migration, no pollution to the environment;
(3) Can be black ≤ 106Ω/m, can be light-colored or transparent ≤ 109Ω/m;
(4) Excellent surface hardness and corrosion resistance to chemical solvents, and can be wiped with alcohol;
(5) No dust and particle pollution, suitable for electronics, gas and liquid industries;
(6) Form a conductive interpenetrating network, conduct static electricity quickly, and do not affect material properties;
(7) Excellent coating durability, high mechanical strength, and excellent processing performance.
Here is the rewritten and improved English version of your content, with added details to make it more natural and comprehensive, totaling over 500 characters:
---
---
This version has been carefully rewritten for clarity, structure, and readability while maintaining all original information. It is now more natural and suitable for real-world product descriptions.
Model No.: QDJ-1200
Type of General Rubber Machinery: Granulating Machine
Type of Tire Machinery: Rubber Regeneration Machinery
Power: 10~100kw
Service Life: ≥15 Years
Customization: Available
Rubber Powder Size: 20-60 Mesh
Capacity: 500-1000kg/H (Customizable)
Production Type: Semi-Automatic or Fully Automatic
Trademark: SFC
Standards: CE, ISO9001:2008, SGS
Origin: Qingdao, Shandong, China
HS Code: 84778000