Car polishing refers to polishing the car before waxing, sealing or coating during car beauty. In the Car Cleaning and car washing industry, Car Wax and car polish are often used alternately. For ordinary people who want to polish their cars, it may be an expensive mistake not to distinguish between car wax and car polish. Polishing is a paint correction process to remove the defects on the surface of your car, while waxing is to lay a protective coating on the paint of the car as a detailed finish.
Car polish is a substance used to improve the appearance of a vehicle's exterior by removing minor scratches, swirl marks, and other imperfections. It is typically made of a combination of abrasive particles and oils or waxes that help to smooth out the surface of the paint and provide a protective layer. Car polish is applied using a soft cloth or polishing pad and is usually buffed off after it has dried to reveal a glossy, shiny finish. It is important to choose the right type of car polish for
Car Polish,Swirl Remover Polish,Car Leather Polish,Polish Wax Spray Jiangyin yinghuameng Houseware Co.,Ltd. , https://www.care-guys.com
Detailed description of our 6 meter thick-line interlock wire cutting machine
A. Equipment structure:
1. Mainframe of thick-line cutting wire machine (including electronic control box) towing power DC2HP motor 1 unit
400W servomotor (Japan Mitsubishi) + reducer (made in Taiwan) will be the power of cutting wire (located inside of machine)............................. .1 set.
2. 6 meter conveyor DC 2HP motor--------------------------------------1 unit
B, Equipment instruction:
6 meter thick-line cutting wire machine
1. Cutting wire speed: 150m every minute, every minute at most up to 150 pcs.
2. Cutting way: round type: 6mm-11mm, flat wire: thickness 3mm-6mm * width 15mm-24mm.
3. Minimum length: 600MM
4. Precision of cutting wire: Under the condition that tension is stable cutting within 2m ±2mm, cutting within 5 meter ±5mm, cutting within 10 meter ±8mm.
5. Way of getting wire: Wire-pushing type or wire-hitting type
6. Voltage: 380V (single-phase) 50HZ or 60HZ
7. Bench direction: right-hand machine or left-hand machine
8. Painting: NO.2 Apple green
9. Area of attachment: (L7500M*W2000MM*H1800MM)
10. Total power: 13KW
C, Device accessories:
1. Cutter (for cutting wire) -------------------------------1 pc
2. Bakelite round (for cutting wire)-----------------------1 group
3. Plain belt 40*790 (towing)----------------------------2 pcs
4. plain belt 24*1280 (getting wire)----------------------1 pc
5. plain belt 24*1310 (getting wire)--------------------- 1 pc
6. toolbox --------------------------------------------------1group
1. Application: Applicable to multi-core cored wire stranding of over two strands.
2. Main characteristics:
- Machine model: SSST800
- Application: applicable to multi-core cored wire stranding of over 2 strands
- Suitable wire diameter: 1-4mm
- Finished outside diameter: 12MM
- Stranding limit: applicable to multi-cored wire assembly of more than two strands.
- Rotating speed: maximum 600RPM, below 550RPM when stable operation
- Wire feeding diameter: Φ1~4mm (cored wire)
- Assembly wire diameter: Φ12MM (cored wire, maximum)
- Diameter of capstan: Φ300MM 4 grooves the surface of aluminum alloy anode treatment.
- Pitch: 30mm---150mm (gear type replace pitch, one pitch about at intervals of 20mm)
- Stranding direction: Both left and right stranding direction
- Coiling shaft Φ630*420*100mm and Φ800*600*100mm
- Upper and lower shaft electric hydraulic lifting
- Tension regulation: motor 5.5KW
- Traversing: track thread screw type discharging wire
l- Drive n motor 30HP motor
Main technical data about our wire cutting machine
Cutting wire speed
150m/m, every minute at most up to 150 pcs.
Cutting way
round type: 6mm-11mm, flat wire: thickness 3mm-6mm*width15mm-24mm.
Minimum length
600MM
Precision of cutting wire
Under the condition that tension is stable cutting within 2m±2mm, cutting Â
within 5 meter ±5mm, cutting within 10 meter ±8mm.
Way of getting wire
Wire-pushing type or wire-hitting type
Voltage
380V (single-phase) 50HZ or  60HZ
Bench direction
right-hand machine or left-hand machine
Painting
apple green or designated by customer
Total  power
13KW
3. We can make a variety of cable machines as following:
1. Extrusion line
Chemical foaming extrusion line
Physical foaming extrusion line
Cored wire insulation extrusion line
Jacket extrusion line
Single twisting machine
Cantilever single twisting machine
High-speed single twisting machine
Horizontal high-speed single twisting machine
Vertical high-speed single twisting machine
Double twisting machine
Copper stranding machine
Bow-type stranding machine
Planetary stranding machine
Cage stranding machine
Crosswire stranding machine
Rigid frame stranding machine
Tubular stranding machine
Drum stranding machine
Triple-core stranding machine with back twist
Caterpillar haul-off unit
Taping machine
Numerical control horizontal single/double layer taping machine
Numerical control vertical single/double layer taping machine
Vertical micro-fine double-layer taping machine
Car Polish