Vegetables are the most important crop species in the development of our facility, and the quality of seeds affects the yield and quality of vegetables. Therefore, before the sowing, the purity, 1000-grain weight, germination rate and germination potential of the seeds need to be determined, and the seeds are determined. Clarity's professional instrument and equipment is the seed cleanness table. Its application can make the result of the seed's clarity analysis more accurate and significantly improve the quality of vegetable seeds.
Continuous Waste Tyre Pyrolysis Plant
Pyrolysis Plant is used for recycling waste tire, waste plastic, waste rubber to fuel oil. According to the actual situation in every country and district, we developed different models of Batch Pyrolysis Plants for waste tires, rubber and plastic with daily capacity 25-40 tons.
Flowchat of Continuous Waste Tyre Pyrolysis Plant
Advantages of Continuous Waste Tyre Pyrolysis Plant
1. Large daily capacity of 25 MT raw materials, and can work 24 hours without any stop for 15-20 days;
2. Auto-loading, auto-discharging and oil coming out at the same time;
3. Only need fuel for the beginning 2-3 hours, then the sync gas generates itself is enough to support heating, saving fuel cost;
4. Low requirement on the raw materials, no need tiny granule, 5cm pieces acceptable for smooth running;
5. High efficiency condensers, more oil output, good quality oil, easy to clean.
6. Sync gas recycling system, fully burned after recycling and utilization, preventing pollution and saving fuel cost.
7. National patent smoke scrubber, can efficient remove the acid gas and dust of the smoke, environmental friendly to meet related national standards.
8. Easy to operate, need less manpower.
Technical Parameter of Continuous Waste Tyre Pyrolysis Plant
NO.
ITEM
Technical Parameter
1
Suitable Raw Materials
Small pieces of Waste tyre,rubber, waste plastic≤5cm
2
Operating Mode
Fully Continuous Operation
3
Structure
Horizontal Type Revolve
4
Loading and discharging
Fully Automatic Feeding and Discharging under High Temperature at Same Time
5
Capacity(24h)
8-20Mt
6
Work Pressure
Slightly Negative Pressure
7
Oil Yield of tyres
40%-45%
8
Reactor Rotational Speed
1R/M
9
Installation Power
110kw
10
Cooling Method
Cycle water
11
Type of Drive
Sprocket Wheel
12
Heating Method
Hot Air
13
Noise dB(A)
≤85
14
Main Reactor Weight (MT)
About 20Mt
15
Total Weight(MT)
About 45Mt
16
Installation Space Required
60m*20m
17
Manpower
2/shift
18
Shipment
5*40HC
19
Delivery time
≤70Days
Continuous Waste Tyre Pyrolysis Plant Continuous Pyrolysis ,Continuous Pyrolysis Plant,Continuous Waste Tyre Recycling,Waste Tyre To Oil Shangqiu Jinpeng Industrial Co., Ltd. , https://www.recyclings.nl
The key to agricultural production quality of vegetable facilities lies in whether the output and quality of vegetables have reached a certain level. As the basis of vegetable production, improving seed quality is an important prerequisite for the development of facility agriculture, and it is also an important guarantee for ensuring the quality of agricultural production facilities. The improvement of seed quality needs to be started from the inspection work. Through the application of testing instruments such as the seed cleanness table, not only the efficiency is improved, but also the technical level of seed detection is improved, which ensures the smooth development of the facility's agricultural production work. .
In the past, the degree of cleanliness of seeds was determined by taking a certain number of seeds, and then using tweezers, a sieve, a magnifying glass, etc., to separate good seeds from waste seeds, impurities, sand, etc., and then calculating the seed's degree of clarity according to the seed's clarity formula. The efficiency is not low, and the seed's clarity is not effectively guaranteed, which often results in a certain deviation between the measurement result and the actual value. The clean seed used to measure the seed germination rate is used to measure the seed germination rate. It is bound to affect the accuracy of the determination results, so to improve the accuracy of seed testing, the key lies in improving the level of seed cleanliness analysis, the application of seed cleanliness workbench, can make the work of the seed clarity analysis work more refined, can significantly improve the seed Cleaness.
After the application of the clean seeds analyzed by the seed cleanness table after the application of facilities to agricultural production, the probability of disease and the survival rate of crops have been greatly improved, the quality of crop growth is high, and the yield and quality have increased significantly. It can be said that the application of the Seed Cleanness Workbench guarantees the production quality of facility agriculture and boosts the development of facility agriculture in the direction of high quality. 
