In summer, many special vehicles will experience high engine water temperatures. Bulk feed carriers are no exception. What to do if the water temperature is too high? Generally encountered in the summer the chance of high water temperature is too high, because the temperature of the sake of the water tank will make it difficult to heat, so that the engine water temperature will have different degrees of increase, once the engine water temperature rise, the hose is also more likely to soften Leakage of cooling water, but the water temperature is too high, the viscosity of the oil will become thinner, and the lubrication strength will decrease. At the same time, high-speed moving parts such as pistons and valves will be easily deformed, resulting in engine weakness. In severe cases, the expansion and deformation of the piston will pull the cylinder cylinder, crankshaft bearings dissolved and hold the crankshaft, etc., resulting in disastrous consequences. So do not think that the water temperature of the bulk feed truck is too high. Don't go right now! The next step is to investigate what causes the water temperature to be too high. It is advisable to do a check before opening the feed truck in bulk. Don't think about checking when you can't continue working when you're on the road. After knowing what causes it, it's important to see if the water temperature is abnormal. If it is, it needs repair or replacement. Look again is not the case of water shortages leaking water tank, if the leak is not serious, then you can use soap and other items to plug the leak and then wait for the vehicle to reach the repair station and then repair. Next, it is also necessary to distinguish between the conditions in which the temperature of the water rises, whether it is a sudden increase or not. If it is sudden water temperature is too high, you should first check whether the bulk feed truck radiator is overheated. If the radiator temperature is too high, the cylinder cushion is damaged. At this time, pay attention to check whether the upper plane and cylinder head joint surface is seriously warped Deformation, if the deformation should be repaired. If the temperature of the radiator is not high, it means that the cooling water is in poor circulation. Check whether the fan belt is broken or severely slipped. If it is normal, then check whether the radiator outlet pipe is sucked, whether there is delamination blockage in the inner hole, and find out the reason to be eliminated. The emergency method is to put a large spring support in the suction pipe. Check if the expansion tube of the thermostat is broken and the rupture should be replaced. If the thermostat is normal, it means that the pump is damaged. Check the repair pump carefully. If the water temperature is too high, it must not be taken lightly. It is also necessary to handle it properly so that it will not affect the bulk feed trucks in order to increase its usage rate!
Catalytic
Converter
We are professional in manufacturing of automotive
catalytic converters and Performance Exhaust products. Our production and
design techniques contribute to Car Sound`s standing as the highest quality and
best valued products on the market.
l Direct-Fit Catalytic Converters
l Race and Diesel Catalytic Converters
l Diesel Particulate Filter
l Metallic Catalyst
l Ceramic Catalyst
l Universal Catalytic Converters
l Spinning Catalytic Converters
Catalytic Converter,Aftermarket Catalytic Converter,Car Catalytic Converter,Stainless Steel Exhaust Catalytic Converter JINING FAREAST LIANGFEI CONVERTER & MUFFLER CO. LTD , https://www.golbaltour.com