Flat packaging bags are a great choice for food packaging, powdered mixes, small products, and flat paper items. These bags could also been in sheet or in roll. With good grade material, nice heat sealing, the bags are water-proof and good for storage.
The packaging bags in roll
Food packaging in sheet
Flat Barrier Bags,Flat Bag On Roll,Flat Bag On Sheet,Side Sealing Flat Bag,Poly Bag Roll,Food For Go Bag BILLION PLASTIC MANUFACTURING CO.,LTD, JIANGMEN , https://www.jmtshirtbag.com
On July 3, Jiangsu Jiesheng Anchoring Machine Co., Ltd. successfully completed the bench test for the φ42mm electric combined anchoring machine produced by Zhenjiang Zhenxing Marine Shipping Co., Ltd., and completed the dismantling and inspection signature on the next day. The performance indicators meet the shipyard. Design requirements, users appreciate the quality of the product and the entire test process.
According to Chenggong, the technical requirements for the delivered products are as follows:
Anchor chain diameter: 42mm
Anchoring load: 75kN
Anchoring speed: 15/9/6m/min
Winch pull: 50kN
Tether speed: 12m/min
Motor power: 30/30/22KW
Composition: It adopts wear-resistant marine anchor sprocket, marine planetary reducer, marine brake control motor, main electric control box, main controller for IP56 type and non-asbestos environmental protection brake belt, base and so on.
Since the beginning of this year, due to the continuous downturn in the market, there are more anchors, winches and winches with different delivery schedules, which have a greater impact on the production and operation planning and procurement of Jiangsu Jiesheng Windlass. Some of the anchoring machines started late, the production cycle was very short, and the shortest time was only 30 days, which was very difficult in terms of technical preparation, production preparation and procurement. To this end, Jiangsu Jiesheng Anchor Machine timely adjusted the internal production plan, concentrated the superior resources to ensure key projects, scheduled production on demand, and established a market-oriented pull-type plan management system. And improve the manufacturing cycle plan, 20-day rolling plan requirements, further increase customer communication efforts, and strive to achieve balanced production. Continue to promote the project management system and improve the quality and efficiency of project management.
All production workshops and quality control main units have always adhered to the goal of “high-quality anchoring machine†in the production process. The relevant personnel of the project work at full load for 12 hours a day, strictly monitoring each production process, and the quality inspection personnel can track the whole process. Serious process discipline and strict inspection process. At the same time, it focuses on repeated inspections and rectifications on paints, cable layouts, nameplates, etc.; timely discovering problems, solving problems, and implementing corrective measures in place. All the user's personalized rectification opinions were completed before delivery. The bench test process was well prepared and arranged reasonably. The entire inspection process was successfully completed within 2 hours, leaving a good impression on the user.