This is a report from John Keller: Engine 92 and Truck 45 arrived at 3830 W 108th Place to find a one-story ranch-style home with visible smoke coming from the front windows. Upon arrival, the situation appeared to be under control, but the fire was still active inside. Truck 31 was called as the second-in due to Battalion 21 and Truck 40 being delayed by a train crossing. Engine 92 made a quick initial knock on the door. Units 2-7-5 and Squad 5 were canceled en route. Engine 75 was temporarily re-assigned to assist Engine 92. The fire was quickly extinguished, and only minor injuries were reported. Companies Involved: More photos can be found HERE. chicagolandfirephotos.smugmug.com/ chicagolandfirephotos.smugmug.com/ chicagolandfirephotos.smugmug.com/ chicagolandfirephotos.smugmug.com/ Welded Bed Plate For Flanges Of Ship Pipe The flange welded single-sided seat plate is mainly installed on the top, side wall and bottom of the cabin or cabinet as the entrance and exit of the cabin or cabinet. Valves, accessories or pipes can be installed directly on the single-sided seat plate.
Flange welded single-sided seat plate is suitable for seawater, fresh water, oil, air and steam pipelines below 300 °C. The commonly used nominal diameter is 15~150 mm, and the nominal pressure is lower than 1.6 MPa. The shape of the single-sided seat plate is similar to the corresponding lap-welded Steel Flange.
Flange welded double-sided seat plates are generally used when pipelines pass through decks and tanks, and the two sides of the seat plate are respectively connected to valves, accessories or pipes. Welded Bed Plate For Flanges Of Ship Pipe,Flanges Of Ship Pipe Welded Bed Plate,Welding Base Plate Flange Of Ship Pipe,Ship Pipe Welding Base Plate Flange Fuyuan Marine Accessories Co., Ltd , https://www.fymarineparts.com
On the Still – E92/E120 (Spare)/T45/T31/B21 (Spare)
On the Working Fire – 2-7-5/Sq5/T40 (RIT)/B20 (RIT)/A72 (RIT)/A17 (Standby)/PFC4-5-6 (Standby)
Compared with the single-sided seat plate, the double-sided seat plate has an extra shoulder and double-sided mounting stud bolts. The outer diameter of the shoulder is 10~20 mm larger than that of the corresponding flange, and the thickness of the shoulder is 6~12 mm.
Its scope of application and other structural dimensions are basically the same as those of the single-sided seat plate.
The manufacturing and installation methods of the flange-welded double-sided seat plate are basically the same as the single-sided seat plate, but when the screw holes are drawn, the positions of the upper and lower screw holes of the seat plate must be staggered from each other and must not overlap; deck or bulkhead The diameter of the hole on the top is 2~3 mm larger than the diameter of the seat plate.